DataWorks 2.0
LogiqPRO®
Vehicle Communication Interface
- Supports Flash over CAN-FD and DoIP up to the specification baud rate
- Quick start-up time at ~300 milliseconds
- Pin switching, including CAN-FD and DoIP on any combination of pins
- Integrated CAN monitor for analyzing ECU message link traffic and integrated bus load monitor
- Low current draw at ~150 mA
- Micro-second message time stamps
- 32KV ESD protection for CAN interfaces
Ask us for a demonstration
Technical data
| Voltage | 6 to 30 volts DC |
| Operating Temperature | -40° - 185°F (-40º to +85ºC) |
| Humidity | 10% to 95% RH |
| Dimensions | (H x W x D) 5.12 in x 3.72 in x 1.64 in (130 mm x 94 mm x 42 mm) |
| Boot Up Time | 300 ms |
| External Connectors / Interfaces | High Density DB44 Vehicle and I/O RJ45 10/100base-t Ethernet; USB-C / USB 2.0 |
| Current Consumption | ~180 mA @ 12 Volts DC; Max; 280 mA @ 12 Volts DC |
| Status Indicators | Power (1), CAN (3), ISO (1), Run (1), Device Ready (1), Software configurable (3), Ethernet connection (2) |
| Digital Input / Output | 4 inputs; 4 outputs* |
| Analog Input | 4 inputs up to 24 Volts DC; 1 input with adjustable gain stage for low-level singls requiring amplification |
| Vehicle Network Interfaces | 3 dual wire CAN; 2 ISO91414; Ford SCP / UBP; plus additional protocols |
| Cert. | Tested Standards CE |
| Enclosure | Blue anondized extruded aluminum |