Shop Presses

Able to operate with up to 150,000 lb of available pressure to be applied to any part that requires a consistent force to remove or replace.

10 Ton Bench Shop Press

Model Number: CBP-10 | Part Number: 485 80055 00

  • A 1.5 in diameter ram has a two-way mountable air/hydraulic or manual pump`
  • Can be either bench mounted or purchased with an integrated stand and safety gates
  • Easily adjusted bolster with six positions and a wide throat

Also Available with Air Assist

Capacity 20,000 lb (9,072 kg)

Cylinder Stroke 10 in (25 cm)

Weight 130 lb (59 kg)

Dimensions (W x D) 25.1 in x 7.1 in (64 cm x 18 cm)

485 80056 00CBP-10A 10 Ton Commercial Bench Shop Press - Air Assist
485 80057 00Safety Guard

10 Ton Shop Press

Model Number: CSP-10 | Part Number: 485 80058 00

  • 1.5" diameter ram has a two-way mountable air/hydraulic or manual pump
  • Easily adjusted bolster with six positions and a wide throat
  • Can be purchased with an integrated stand and safety gates

Also Available with Air Assist

Capacity 20,000 lbs (9,072 kg)

Cylinder Stroke 10 in (25.4 cm)

Weight 180 lb (81.7 kg)

Adjustment Increments 6 in (15.2 cm)

Dimensions (W x D) 25.1 in x 28 in (63.8 cm x 71.1 cm)

485 80059 00CSP-10A 10 Ton Shop Press - Air Assist
485 80061 00Safety Guard
485 80060 00Accessory Kit

25 Ton Shop Press

Model Number: CSP-25 | Part Number: 485 80062 00

  • 1.5" diameter ram has a two-way mountable air/hydraulic or manual pump
  • Easily adjusted bolster with six positions and a wide throat
  • Can be purchased with an integrated stand and safety gates

Also Available with Air Assist

Capacity 50,000 lb (22,680 kg)

Cylinder Stroke 6.3 in (15.9 cm)

Weight 510 lb (231 kg)

Adjustment Increments 4.3 in (10.8 cm)

Dimensions (W x D) 40.5 in x 70.4 in (102.9 cm x 178.8 cm)

485 80063 00CSP-25A 25 Ton Shop Press - Air Assist
485 80065 00Accessory Kit
485 80064 00Safety Guard

75 Ton Shop Press

Model Number: CSP-75 | Part Number: 485 80066 00

  • Side-to-Side ram adjustments
  • Adjustable bolster with six positions
  • 4-Way mountable air/hydraulic pump
  • Winch cable for raising and lowering the bolster
  • Gray engineered and built power units

Capacity 75 Tons (68,039 kg)

Power Source Air/Hydraulic

Stroke 8.8 in (22.2 cm)

Horizontal Ram Travel 32 in (81 cm)

Throat Width 50 in (127 cm)

Inside Throat Depth 8 in (20 cm)

Outside Throat Depth 14 in (25 cm)

Required Air Pressure 120 to 200 psi (8.3 to 13.8 bar)

Adjustment Increments 6 in (15 cm)

Vertical Throat Minimum 9.5 in (24.1 cm)

Vertical Throat Maximum 39.5 in (100.3 cm)

Dimensions (H x W x D) 85 in x 78 in x 44 in (216 cm x 198 cm x 112 cm)

485 80067 00CSP-75K 75 Ton Shop Press with Accessory Kit
485 80068 00Mountable Guard (for each side)
485 80069 00Accessory Kit